Reskote T-Guard

Starmarine

Reskote T-Guard

Reskote T-Guard protects deck steam lines, steam valve manifolds and windlass steam chests from the destructive and costly effects of corrosion on sea going vessels and has proven to be especially effective against the very severe conditions found on chemical and product carriers.

Reskote T-guard withstands higher temperatures for longer periods than any similar product and even proved to be effective on inert gas scrubber inlet elbows and expansion bellows where temperatures do not exceed 225°C.

Reskote T-Guard, when applied to cold surfaces, will skin over and be dry to touch within 6 to 8 hours after applying. The body of the coating however, will remain semi-fluid for several months at ambient temperature depending upon the applied film thickness.

Double Overlapping Pigment System – Provides extra tough but flexible film, improved adhesion to substrate, resistance to abrasion plus resistance to UV, moisture transmission and washout. Solvent Free – Environment friendly, very high flash point, extra safety margin for use, handling, storage and shipment.

Reskote T-Guard is a viscous, high build compound that requires only minimal surface praparation and is easily applied by brushing… no more messy and wasteful smearing of greasy material. Reskote T-Guard withstands higher temperatures for longer periods than any similar product and drastically reduces repair and maintenance cost. Applied at only half the thickness of old formula – twice as economical!

Download TDS