Patsa
Road Marking Paint Yellow
A quick drying, 100% Acrylic solvent based, high build Road Marking Paint, which has good resistance to wear and tear, impact, oil, gasoline and water. To enhance the reective properties of the paint glass beads may be incorporated by either premixing (2 parts paint: 1 paint beads) or by dropping into the surface of the wet paint. The rst method gives long term reection as trafc abrasion continually exposes the spheres; whilst the second gives immediate reection but this declines with continued wear. buyer, hereby expressly waives any claim to additional damages.
RECOMMENDED USES
Suitable for interior or exterior use for the lining/ marking of roads runways, pavements, car parks, playgrounds, warehouses, safety areas. Typical substrates include concrete, stone, and asphalt.
APPLICATION CONDITIONS
Stir well before use. Apply by brush, roller, air spray or specially modied airless spray. (For details of spray equipment, contact PATSA Technical Service Department.
Thinning: Brush / Roller 0 – 5% PATSA Thinner 7. Air / Airless Spray 0 – 15% PATSA Thinner 7.
Cleaning: Clean all tools and equipment immediately after use with PATSA Thinner 7.
Caution: Do not use when humidity levels may cause surface condensation (maximum 85%), during rainy conditions, or if temperatures are likely to fall below 5°C during application and drying. Protect from frost.
SAFETY – FLAMMABLE
Use only in well‐ ventilated areas. In case of insufcient ventilation during application, wear suitable respiratory equipment. Do not breathe vapor / spray. In case of contact with eyes rise immediately with plenty of sweet water and seek medical assistance.